3535 SW Multnomah Blvd. Suite #104 Portland, Oregon 97219
                    phone: (503) 244-6610  fax: (503) 452-0653
                     our e-mail address: office@sidingsolutions.com

 

MASONITE SIDING ID PAGE Masonite Omniwood Siding:

 

Following is a Side view of Masonite Omniwood. : Made of OSB with a hardboard face

Omniwood panel Siding:


Note: Omniwood panels have a one inch grooves 8 inches o.c. .

 

Omniwood Lap Siding:

Omniwood is an OSB product with a hardboard overlay
Please note: There are no identifiable knots

Below is a good photo of Masonite Onmiwood siding that shows and the OSB underlayment and the hardboard overlay.

omniwood_makeup

 

Click here for the Omniwood brochure photos that had been put up by Kinsella

Click here for Masonite Omniwood with a Pine Texture

Another piece of Masonite Omniwood lap Siding:

The photo below is the back side of the above Omniwood Board. The strands of wood are about 1/4 inch wide and there are at least two slightly embossed /raised rows running the length of the siding.

back_side

 

For comparison purposes the following board is the back of Louisiana Pacific Siding. Do not confuse the two.

The strands of Louisiana Pacific Siding are about 1 inch wide :

 

 

 

 

 

Back to Helpful Links for Identyfying Siding

Back to Status of Class Action and Warranty Page

Back to Home Page